Wednesday, September 5, 2012

The OAuth 2.0 Authorization Framework


Abstract

The OAuth 2.0 authorization framework enables a third-party application to obtain limited access to an HTTP service, either on behalf of a resource owner by orchestrating an approval interaction between the resource owner and the HTTP service, or by allowing the third-party application to obtain access on its own behalf. This specification replaces and obsoletes the OAuth 1.0 protocol described in RFC 5849.

Table of Contents


1. Introduction

In the traditional client-server authentication model, the client requests an access restricted resource (protected resource) on the server by authenticating with the server using the resource owner's credentials. In order to provide third-party applications access to restricted resources, the resource owner shares its credentials with the third-party. This creates several problems and limitations:
  • Third-party applications are required to store the resource owner's credentials for future use, typically a password in clear-text.
  • Servers are required to support password authentication, despite the security weaknesses inherent in passwords.
  • Third-party applications gain overly broad access to the resource owner's protected resources, leaving resource owners without any ability to restrict duration or access to a limited subset of resources.
  • Resource owners cannot revoke access to an individual third-party without revoking access to all third-parties, and must do so by changing their password.
  • Compromise of any third-party application results in compromise of the end-user's password and all of the data protected by that password.
OAuth addresses these issues by introducing an authorization layer and separating the role of the client from that of the resource owner. In OAuth, the client requests access to resources controlled by the resource owner and hosted by the resource server, and is issued a different set of credentials than those of the resource owner.
Instead of using the resource owner's credentials to access protected resources, the client obtains an access token - a string denoting a specific scope, lifetime, and other access attributes. Access tokens are issued to third-party clients by an authorization server with the approval of the resource owner. The client uses the access token to access the protected resources hosted by the resource server.
For example, an end-user (resource owner) can grant a printing service (client) access to her protected photos stored at a photo sharing service (resource server), without sharing her username and password with the printing service. Instead, she authenticates directly with a server trusted by the photo sharing service (authorization server), which issues the printing service delegation-specific credentials (access token).
This specification is designed for use with HTTP ([RFC2616]). The use of OAuth over any other protocol than HTTP is out of scope.
The OAuth 1.0 protocol ([RFC5849]), published as an informational document, was the result of a small ad-hoc community effort. This standards-track specification builds on the OAuth 1.0 deployment experience, as well as additional use cases and extensibility requirements gathered from the wider IETF community. The OAuth 2.0 protocol is not backward compatible with OAuth 1.0. The two versions may co-exist on the network and implementations may choose to support both. However, it is the intention of this specification that new implementation support OAuth 2.0 as specified in this document, and that OAuth 1.0 is used only to support existing deployments. The OAuth 2.0 protocol shares very few implementation details with the OAuth 1.0 protocol. Implementers familiar with OAuth 1.0 should approach this document without any assumptions as to its structure and details.

1.1. Roles

OAuth defines four roles:
resource owner

An entity capable of granting access to a protected resource. When the resource owner is a person, it is referred to as an end-user.
resource server

The server hosting the protected resources, capable of accepting and responding to protected resource requests using access tokens.
client

An application making protected resource requests on behalf of the resource owner and with its authorization. The term client does not imply any particular implementation characteristics (e.g. whether the application executes on a server, a desktop, or other devices).
authorization server

The server issuing access tokens to the client after successfully authenticating the resource owner and obtaining authorization.
The interaction between the authorization server and resource server is beyond the scope of this specification. The authorization server may be the same server as the resource server or a separate entity. A single authorization server may issue access tokens accepted by multiple resource servers.

1.2. Protocol Flow

  +--------+                               +---------------+
  |        |--(A)- Authorization Request ->|   Resource    |
  |        |                               |     Owner     |
  |        |<-(B)-- Authorization Grant ---|               |
  |        |                               +---------------+
  |        |
  |        |                               +---------------+
  |        |--(C)-- Authorization Grant -->| Authorization |
  | Client |                               |     Server    |
  |        |<-(D)----- Access Token -------|               |
  |        |                               +---------------+
  |        |
  |        |                               +---------------+
  |        |--(E)----- Access Token ------>|    Resource   |
  |        |                               |     Server    |
  |        |<-(F)--- Protected Resource ---|               |
  +--------+                               +---------------+
The abstract OAuth 2.0 flow illustrated in Figure 1 describes the interaction between the four roles and includes the following steps:
(%C)
The client requests authorization from the resource owner. The authorization request can be made directly to the resource owner (as shown), or preferably indirectly via the authorization server as an intermediary.
(%C)
The client receives an authorization grant, which is a credential representing the resource owner's authorization, expressed using one of four grant types defined in this specification or using an extension grant type. The authorization grant type depends on the method used by the client to request authorization and the types supported by the authorization server.
(%C)
The client requests an access token by authenticating with the authorization server and presenting the authorization grant.
(%C)
The authorization server authenticates the client and validates the authorization grant, and if valid issues an access token.
(%C)
The client requests the protected resource from the resource server and authenticates by presenting the access token.
(%C)
The resource server validates the access token, and if valid, serves the request.
The preferred method for the client to obtain an authorization grant from the resource owner (depicted in steps (A) and (B)) is to use the authorization server as an intermediary, which is illustrated in Figure 6.

1.3. Authorization Grant

An authorization grant is a credential representing the resource owner's authorization (to access its protected resources) used by the client to obtain an access token. This specification defines four grant types: authorization code, implicit, resource owner password credentials, and client credentials, as well as an extensibility mechanism for defining additional types.

1.3.1. Authorization Code

The authorization code is obtained by using an authorization server as an intermediary between the client and resource owner. Instead of requesting authorization directly from the resource owner, the client directs the resource owner to an authorization server (via its user-agent as defined in [RFC2616]), which in turn directs the resource owner back to the client with the authorization code.
Before directing the resource owner back to the client with the authorization code, the authorization server authenticates the resource owner and obtains authorization. Because the resource owner only authenticates with the authorization server, the resource owner's credentials are never shared with the client.
The authorization code provides a few important security benefits such as the ability to authenticate the client, and the transmission of the access token directly to the client without passing it through the resource owner's user-agent, potentially exposing it to others, including the resource owner.

1.3.2. Implicit

The implicit grant is a simplified authorization code flow optimized for clients implemented in a browser using a scripting language such as JavaScript. In the implicit flow, instead of issuing the client an authorization code, the client is issued an access token directly (as the result of the resource owner authorization). The grant type is implicit as no intermediate credentials (such as an authorization code) are issued (and later used to obtain an access token).
When issuing an access token during the implicit grant flow, the authorization server does not authenticate the client. In some cases, the client identity can be verified via the redirection URI used to deliver the access token to the client. The access token may be exposed to the resource owner or other applications with access to the resource owner's user-agent.
Implicit grants improve the responsiveness and efficiency of some clients (such as a client implemented as an in-browser application) since it reduces the number of round trips required to obtain an access token. However, this convenience should be weighed against the security implications of using implicit grants, such as those described in Section 10.3 and Section 10.16, especially when the authorization code grant type is available.

1.3.3. Resource Owner Password Credentials

The resource owner password credentials (i.e. username and password) can be used directly as an authorization grant to obtain an access token. The credentials should only be used when there is a high degree of trust between the resource owner and the client (e.g. the client is part of the device operating system or a highly privileged application), and when other authorization grant types are not available (such as an authorization code).
Even though this grant type requires direct client access to the resource owner credentials, the resource owner credentials are used for a single request and are exchanged for an access token. This grant type can eliminate the need for the client to store the resource owner credentials for future use, by exchanging the credentials with a long-lived access token or refresh token.

1.3.4. Client Credentials

The client credentials (or other forms of client authentication) can be used as an authorization grant when the authorization scope is limited to the protected resources under the control of the client, or to protected resources previously arranged with the authorization server. Client credentials are used as an authorization grant typically when the client is acting on its own behalf (the client is also the resource owner), or is requesting access to protected resources based on an authorization previously arranged with the authorization server.

1.4. Access Token

Access tokens are credentials used to access protected resources. An access token is a string representing an authorization issued to the client. The string is usually opaque to the client. Tokens represent specific scopes and durations of access, granted by the resource owner, and enforced by the resource server and authorization server.
The token may denote an identifier used to retrieve the authorization information, or self-contain the authorization information in a verifiable manner (i.e. a token string consisting of some data and a signature). Additional authentication credentials, which are beyond the scope of this specification, may be required in order for the client to use a token.
The access token provides an abstraction layer, replacing different authorization constructs (e.g. username and password) with a single token understood by the resource server. This abstraction enables issuing access tokens more restrictive than the authorization grant used to obtain them, as well as removing the resource server's need to understand a wide range of authentication methods.
Access tokens can have different formats, structures, and methods of utilization (e.g. cryptographic properties) based on the resource server security requirements. Access token attributes and the methods used to access protected resources are beyond the scope of this specification and are defined by companion specifications.

1.5. Refresh Token

Refresh tokens are credentials used to obtain access tokens. Refresh tokens are issued to the client by the authorization server and are used to obtain a new access token when the current access token becomes invalid or expires, or to obtain additional access tokens with identical or narrower scope (access tokens may have a shorter lifetime and fewer permissions than authorized by the resource owner). Issuing a refresh token is optional at the discretion of the authorization server. If the authorization server issues a refresh token, it is included when issuing an access token (i.e. step (D) in Figure 1).
A refresh token is a string representing the authorization granted to the client by the resource owner. The string is usually opaque to the client. The token denotes an identifier used to retrieve the authorization information. Unlike access tokens, refresh tokens are intended for use only with authorization servers and are never sent to resource servers.
  +--------+                                           +---------------+
  |        |--(A)------- Authorization Grant --------->|               |
  |        |                                           |               |
  |        |<-(B)----------- Access Token -------------|               |
  |        |               & Refresh Token             |               |
  |        |                                           |               |
  |        |                            +----------+   |               |
  |        |--(C)---- Access Token ---->|          |   |               |
  |        |                            |          |   |               |
  |        |<-(D)- Protected Resource --| Resource |   | Authorization |
  | Client |                            |  Server  |   |     Server    |
  |        |--(E)---- Access Token ---->|          |   |               |
  |        |                            |          |   |               |
  |        |<-(F)- Invalid Token Error -|          |   |               |
  |        |                            +----------+   |               |
  |        |                                           |               |
  |        |--(G)----------- Refresh Token ----------->|               |
  |        |                                           |               |
  |        |<-(H)----------- Access Token -------------|               |
  +--------+           & Optional Refresh Token        +---------------+
The flow illustrated in Figure 2 includes the following steps:
(%C)
The client requests an access token by authenticating with the authorization server, and presenting an authorization grant.
(%C)
The authorization server authenticates the client and validates the authorization grant, and if valid issues an access token and a refresh token.
(%C)
The client makes a protected resource request to the resource server by presenting the access token.
(%C)
The resource server validates the access token, and if valid, serves the request.
(%C)
Steps (C) and (D) repeat until the access token expires. If the client knows the access token expired, it skips to step (G), otherwise it makes another protected resource request.
(%C)
Since the access token is invalid, the resource server returns an invalid token error.
(%C)
The client requests a new access token by authenticating with the authorization server and presenting the refresh token. The client authentication requirements are based on the client type and on the authorization server policies.
(%C)
The authorization server authenticates the client and validates the refresh token, and if valid issues a new access token (and optionally, a new refresh token).
Steps C, D, E, and F are outside the scope of this specification as described in Section 7.

1.6. TLS Version

Whenever TLS is used by this specification, the appropriate version (or versions) of TLS will vary over time, based on the widespread deployment and known security vulnerabilities. At the time of this writing, TLS version 1.2 [RFC5246] is the most recent version, but has a very limited deployment base and might not be readily available for implementation. TLS version 1.0 [RFC2246] is the most widely deployed version, and will provide the broadest interoperability.
Implementations MAY also support additional transport-layer security mechanisms that meet their security requirements.

1.7. HTTP Redirections

This specification makes extensive use of HTTP redirections, in which the client or the authorization server directs the resource owner's user-agent to another destination. While the examples in this specification show the use of the HTTP 302 status code, any other method available via the user-agent to accomplish this redirection is allowed and is considered to be an implementation detail.

1.8. Interoperability

OAuth 2.0 provides a rich authorization framework with well-defined security properties. However, as a rich and highly extensible framework with many optional components, on its own, this specification is likely to produce a wide range of non-interoperable implementations.
In addition, this specification leaves a few required components partially or fully undefined (e.g. client registration, authorization server capabilities, endpoint discovery). Without these components, clients must be manually and specifically configured against a specific authorization server and resource server in order to interoperate.
This framework was designed with the clear expectation that future work will define prescriptive profiles and extensions necessary to achieve full web-scale interoperability.

1.9. Notational Conventions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this specification are to be interpreted as described in [RFC2119].
This specification uses the Augmented Backus-Naur Form (ABNF) notation of [RFC5234]. Additionally, the rule URI-Reference is included from Uniform Resource Identifier (URI)[RFC3986].
Certain security-related terms are to be understood in the sense defined in [RFC4949]. These terms include, but are not limited to, "attack", "authentication", "authorization", "certificate", "confidentiality", "credential", "encryption", "identity", "sign", "signature", "trust", "validate", and "verify".
Unless otherwise noted, all the protocol parameter names and values are case sensitive.

2. Client Registration

Before initiating the protocol, the client registers with the authorization server. The means through which the client registers with the authorization server are beyond the scope of this specification, but typically involve end-user interaction with an HTML registration form.
Client registration does not require a direct interaction between the client and the authorization server. When supported by the authorization server, registration can rely on other means for establishing trust and obtaining the required client properties (e.g. redirection URI, client type). For example, registration can be accomplished using a self-issued or third-party-issued assertion, or by the authorization server performing client discovery using a trusted channel.
When registering a client, the client developer SHALL:
  • specify the client type as described in Section 2.1,
  • provide its client redirection URIs as described in Section 3.1.2, and
  • include any other information required by the authorization server (e.g. application name, website, description, logo image, the acceptance of legal terms).

2.1. Client Types

OAuth defines two client types, based on their ability to authenticate securely with the authorization server (i.e. ability to maintain the confidentiality of their client credentials):
confidential

Clients capable of maintaining the confidentiality of their credentials (e.g. client implemented on a secure server with restricted access to the client credentials), or capable of secure client authentication using other means.
public

Clients incapable of maintaining the confidentiality of their credentials (e.g. clients executing on the device used by the resource owner such as an installed native application or a web browser-based application), and incapable of secure client authentication via any other means.
The client type designation is based on the authorization server's definition of secure authentication and its acceptable exposure levels of client credentials. The authorization server SHOULD NOT make assumptions about the client type.
A client may be implemented as a distributed set of components, each with a different client type and security context (e.g. a distributed client with both a confidential server-based component and a public browser-based component). If the authorization server does not provide support for such clients, or does not provide guidance with regard to their registration, the client SHOULD register each component as a separate client.
This specification has been designed around the following client profiles:
web application

A web application is a confidential client running on a web server. Resource owners access the client via an HTML user interface rendered in a user-agent on the device used by the resource owner. The client credentials as well as any access token issued to the client are stored on the web server and are not exposed to or accessible by the resource owner.
user-agent-based application

A user-agent-based application is a public client in which the client code is downloaded from a web server and executes within a user-agent (e.g. web browser) on the device used by the resource owner. Protocol data and credentials are easily accessible (and often visible) to the resource owner. Since such applications reside within the user-agent, they can make seamless use of the user-agent capabilities when requesting authorization.
native application

A native application is a public client installed and executed on the device used by the resource owner. Protocol data and credentials are accessible to the resource owner. It is assumed that any client authentication credentials included in the application can be extracted. On the other hand, dynamically issued credentials such as access tokens or refresh tokens can receive an acceptable level of protection. At a minimum, these credentials are protected from hostile servers with which the application may interact with. On some platforms these credentials might be protected from other applications residing on the same device.

2.2. Client Identifier

The authorization server issues the registered client a client identifier - a unique string representing the registration information provided by the client. The client identifier is not a secret; it is exposed to the resource owner, and MUST NOT be used alone for client authentication. The client identifier is unique to the authorization server.
The client identifier string size is left undefined by this specification. The client should avoid making assumptions about the identifier size. The authorization server SHOULD document the size of any identifier it issues.

2.3. Client Authentication

If the client type is confidential, the client and authorization server establish a client authentication method suitable for the security requirements of the authorization server. The authorization server MAY accept any form of client authentication meeting its security requirements.
Confidential clients are typically issued (or establish) a set of client credentials used for authenticating with the authorization server (e.g. password, public/private key pair).
The authorization server MAY establish a client authentication method with public clients. However, the authorization server MUST NOT rely on public client authentication for the purpose of identifying the client.
The client MUST NOT use more than one authentication method in each request.

2.3.1. Client Password

Clients in possession of a client password MAY use the HTTP Basic authentication scheme as defined in [RFC2617] to authenticate with the authorization server. The client identifier is encoded using the application/x-www-form-urlencoded encoding algorithm per Appendix Appendix B and the encoded value is used as the username; the client password is encoded using the same algorithm and used as the password. The authorization server MUST support the HTTP Basic authentication scheme for authenticating clients that were issued a client password.
For example (with extra line breaks for display purposes only):
  Authorization: Basic czZCaGRSa3F0Mzo3RmpmcDBaQnIxS3REUmJuZlZkbUl3
Alternatively, the authorization server MAY support including the client credentials in the request body using the following parameters:
client_id

REQUIRED. The client identifier issued to the client during the registration process described by Section 2.2.
client_secret

REQUIRED. The client secret. The client MAY omit the parameter if the client secret is an empty string.
Including the client credentials in the request body using the two parameters is NOT RECOMMENDED, and SHOULD be limited to clients unable to directly utilize the HTTP Basic authentication scheme (or other password-based HTTP authentication schemes). The parameters can only be transmitted in the request body and MUST NOT be included in the request URI.
For example, requesting to refresh an access token (Section 6) using the body parameters (with extra line breaks for display purposes only):
  POST /token HTTP/1.1
  Host: server.example.com
  Content-Type: application/x-www-form-urlencoded

  grant_type=refresh_token&refresh_token=tGzv3JOkF0XG5Qx2TlKWIA
  &client_id=s6BhdRkqt3&client_secret=7Fjfp0ZBr1KtDRbnfVdmIw
The authorization server MUST require the use of TLS as described in Section 1.6 when sending requests using password authentication.
Since this client authentication method involves a password, the authorization server MUST protect any endpoint utilizing it against brute force attacks.

2.3.2. Other Authentication Methods

The authorization server MAY support any suitable HTTP authentication scheme matching its security requirements. When using other authentication methods, the authorization server MUST define a mapping between the client identifier (registration record) and authentication scheme.

2.4. Unregistered Clients

This specification does not exclude the use of unregistered clients. However, the use with such clients is beyond the scope of this specification, and requires additional security analysis and review of its interoperability impact.

3. Protocol Endpoints

The authorization process utilizes two authorization server endpoints (HTTP resources):
  • Authorization endpoint - used by the client to obtain authorization from the resource owner via user-agent redirection.
  • Token endpoint - used by the client to exchange an authorization grant for an access token, typically with client authentication.
As well as one client endpoint:
  • Redirection endpoint - used by the authorization server to return authorization credentials responses to the client via the resource owner user-agent.
Not every authorization grant type utilizes both endpoints. Extension grant types MAY define additional endpoints as needed.

3.1. Authorization Endpoint

The authorization endpoint is used to interact with the resource owner and obtain an authorization grant. The authorization server MUST first verify the identity of the resource owner. The way in which the authorization server authenticates the resource owner (e.g. username and password login, session cookies) is beyond the scope of this specification.
The means through which the client obtains the location of the authorization endpoint are beyond the scope of this specification, but the location is typically provided in the service documentation.
The endpoint URI MAY include an application/x-www-form-urlencoded formatted (per Appendix Appendix B) query component ([RFC3986] section 3.4), which MUST be retained when adding additional query parameters. The endpoint URI MUST NOT include a fragment component.
Since requests to the authorization endpoint result in user authentication and the transmission of clear-text credentials (in the HTTP response), the authorization server MUST require the use of TLS as described in Section 1.6 when sending requests to the authorization endpoint.
The authorization server MUST support the use of the HTTP GET method [RFC2616] for the authorization endpoint, and MAY support the use of the POST method as well.
Parameters sent without a value MUST be treated as if they were omitted from the request. The authorization server MUST ignore unrecognized request parameters. Request and response parameters MUST NOT be included more than once.

3.1.1. Response Type

The authorization endpoint is used by the authorization code grant type and implicit grant type flows. The client informs the authorization server of the desired grant type using the following parameter:
response_type

REQUIRED. The value MUST be one of code for requesting an authorization code as described by Section 4.1.1token for requesting an access token (implicit grant) as described by Section 4.2.1, or a registered extension value as described by Section 8.4.
Extension response types MAY contain a space-delimited (%x20) list of values, where the order of values does not matter (e.g. response type a b is the same as b a). The meaning of such composite response types is defined by their respective specifications.
If an authorization request is missing the response_type parameter, or if the response type is not understood, the authorization server MUST return an error response as described in Section 4.1.2.1.

3.1.2. Redirection Endpoint

After completing its interaction with the resource owner, the authorization server directs the resource owner's user-agent back to the client. The authorization server redirects the user-agent to the client's redirection endpoint previously established with the authorization server during the client registration process or when making the authorization request.
The redirection endpoint URI MUST be an absolute URI as defined by [RFC3986] section 4.3. The endpoint URI MAY include an application/x-www-form-urlencoded formatted (per Appendix Appendix B) query component ([RFC3986] section 3.4), which MUST be retained when adding additional query parameters. The endpoint URI MUST NOT include a fragment component.

3.1.2.1. Endpoint Request Confidentiality

The redirection endpoint SHOULD require the use of TLS as described in Section 1.6 when the requested response type is code or token, or when the redirection request will result in the transmission of sensitive credentials over an open network. This specification does not mandate the use of TLS because at the time of this writing, requiring clients to deploy TLS is a significant hurdle for many client developers. If TLS is not available, the authorization server SHOULD warn the resource owner about the insecure endpoint prior to redirection (e.g. display a message during the authorization request).
Lack of transport-layer security can have a severe impact on the security of the client and the protected resources it is authorized to access. The use of transport-layer security is particularly critical when the authorization process is used as a form of delegated end-user authentication by the client (e.g. third-party sign-in service).

3.1.2.2. Registration Requirements

The authorization server MUST require the following clients to register their redirection endpoint:
  • Public clients.
  • Confidential clients utilizing the implicit grant type.
The authorization server SHOULD require all clients to register their redirection endpoint prior to utilizing the authorization endpoint.
The authorization server SHOULD require the client to provide the complete redirection URI (the client MAY use the state request parameter to achieve per-request customization). If requiring the registration of the complete redirection URI is not possible, the authorization server SHOULD require the registration of the URI scheme, authority, and path (allowing the client to dynamically vary only the query component of the redirection URI when requesting authorization).
The authorization server MAY allow the client to register multiple redirection endpoints.
Lack of a redirection URI registration requirement can enable an attacker to use the authorization endpoint as open redirector as described in Section 10.15.

3.1.2.3. Dynamic Configuration

If multiple redirection URIs have been registered, if only part of the redirection URI has been registered, or if no redirection URI has been registered, the client MUST include a redirection URI with the authorization request using the redirect_uri request parameter.
When a redirection URI is included in an authorization request, the authorization server MUST compare and match the value received against at least one of the registered redirection URIs (or URI components) as defined in [RFC3986] section 6, if any redirection URIs were registered. If the client registration included the full redirection URI, the authorization server MUST compare the two URIs using simple string comparison as defined in [RFC3986] section 6.2.1.

3.1.2.4. Invalid Endpoint

If an authorization request fails validation due to a missing, invalid, or mismatching redirection URI, the authorization server SHOULD inform the resource owner of the error, and MUST NOT automatically redirect the user-agent to the invalid redirection URI.

3.1.2.5. Endpoint Content

The redirection request to the client's endpoint typically results in an HTML document response, processed by the user-agent. If the HTML response is served directly as the result of the redirection request, any script included in the HTML document will execute with full access to the redirection URI and the credentials it contains.
The client SHOULD NOT include any third-party scripts (e.g. third-party analytics, social plug-ins, ad networks) in the redirection endpoint response. Instead, it SHOULD extract the credentials from the URI and redirect the user-agent again to another endpoint without exposing the credentials (in the URI or elsewhere). If third-party scripts are included, the client MUST ensure that its own scripts (used to extract and remove the credentials from the URI) will execute first.

3.2. Token Endpoint

The token endpoint is used by the client to obtain an access token by presenting its authorization grant or refresh token. The token endpoint is used with every authorization grant except for the implicit grant type (since an access token is issued directly).
The means through which the client obtains the location of the token endpoint are beyond the scope of this specification but is typically provided in the service documentation.
The endpoint URI MAY include an application/x-www-form-urlencoded formatted (per Appendix Appendix B) query component ([RFC3986] section 3.4), which MUST be retained when adding additional query parameters. The endpoint URI MUST NOT include a fragment component.
Since requests to the token endpoint result in the transmission of clear-text credentials (in the HTTP request and response), the authorization server MUST require the use of TLS as described in Section 1.6 when sending requests to the token endpoint.
The client MUST use the HTTP POST method when making access token requests.
Parameters sent without a value MUST be treated as if they were omitted from the request. The authorization server MUST ignore unrecognized request parameters. Request and response parameters MUST NOT be included more than once.

3.2.1. Client Authentication

Confidential clients or other clients issued client credentials MUST authenticate with the authorization server as described in Section 2.3 when making requests to the token endpoint. Client authentication is used for:
  • Enforcing the binding of refresh tokens and authorization codes to the client they were issued to. Client authentication is critical when an authorization code is transmitted to the redirection endpoint over an insecure channel, or when the redirection URI has not been registered in full.
  • Recovering from a compromised client by disabling the client or changing its credentials, thus preventing an attacker from abusing stolen refresh tokens. Changing a single set of client credentials is significantly faster than revoking an entire set of refresh tokens.
  • Implementing authentication management best practices, which require periodic credential rotation. Rotation of an entire set of refresh tokens can be challenging, while rotation of a single set of client credentials is significantly easier.
A client MAY use the client_id request parameter to identify itself when sending requests to the token endpoint. In the authorization_code grant_type request to the token endpoint, an unauthenticated client MUST send its client_id to prevent itself from inadvertently accepting a code intended for a client with a different client_id. This protects the client from substitution of the authentication code. (It provides no additional security for the protected resource.)

3.3. Access Token Scope

The authorization and token endpoints allow the client to specify the scope of the access request using the scope request parameter. In turn, the authorization server uses thescope response parameter to inform the client of the scope of the access token issued.
The value of the scope parameter is expressed as a list of space-delimited, case sensitive strings. The strings are defined by the authorization server. If the value contains multiple space-delimited strings, their order does not matter, and each string adds an additional access range to the requested scope.
  scope       = scope-token *( SP scope-token )
  scope-token = 1*( %x21 / %x23-5B / %x5D-7E )
The authorization server MAY fully or partially ignore the scope requested by the client based on the authorization server policy or the resource owner's instructions. If the issued access token scope is different from the one requested by the client, the authorization server MUST include the scope response parameter to inform the client of the actual scope granted.
If the client omits the scope parameter when requesting authorization, the authorization server MUST either process the request using a pre-defined default value, or fail the request indicating an invalid scope. The authorization server SHOULD document its scope requirements and default value (if defined).

4. Obtaining Authorization

To request an access token, the client obtains authorization from the resource owner. The authorization is expressed in the form of an authorization grant, which the client uses to request the access token. OAuth defines four grant types: authorization code, implicit, resource owner password credentials, and client credentials. It also provides an extension mechanism for defining additional grant types.

4.1. Authorization Code Grant

The authorization code grant type is used to obtain both access tokens and refresh tokens and is optimized for confidential clients. As a redirection-based flow, the client must be capable of interacting with the resource owner's user-agent (typically a web browser) and capable of receiving incoming requests (via redirection) from the authorization server.
  +----------+
  | Resource |
  |   Owner  |
  |          |
  +----------+
       ^
       |
      (B)      
  +----|-----+          Client Identifier      +---------------+
  |         -+----(A)-- & Redirection URI ---->|               |
  |  User-   |                                 | Authorization |
  |  Agent  -+----(B)-- User authenticates --->|     Server    |
  |          |                                 |               |
  |         -+----(C)-- Authorization Code ---<|               |
  +-|----|---+                                 +---------------+
    |    |                                         ^      v
   (A)  (C)                                        |      |
    |    |                                         |      |
    ^    v                                         |      |
  +---------+                                      |      |
  |         |>---(D)-- Authorization Code ---------'      |
  |  Client |          & Redirection URI                  |
  |         |                                             |
  |         |<---(E)----- Access Token -------------------'
  +---------+       (w/ Optional Refresh Token)
Note: The lines illustrating steps A, B, and C are broken into two parts as they pass through the user-agent.
The flow illustrated in Figure 6 includes the following steps:
(%C)
The client initiates the flow by directing the resource owner's user-agent to the authorization endpoint. The client includes its client identifier, requested scope, local state, and a redirection URI to which the authorization server will send the user-agent back once access is granted (or denied).
(%C)
The authorization server authenticates the resource owner (via the user-agent) and establishes whether the resource owner grants or denies the client's access request.
(%C)
Assuming the resource owner grants access, the authorization server redirects the user-agent back to the client using the redirection URI provided earlier (in the request or during client registration). The redirection URI includes an authorization code and any local state provided by the client earlier.
(%C)
The client requests an access token from the authorization server's token endpoint by including the authorization code received in the previous step. When making the request, the client authenticates with the authorization server. The client includes the redirection URI used to obtain the authorization code for verification.
(%C)
The authorization server authenticates the client, validates the authorization code, and ensures the redirection URI received matches the URI used to redirect the client in step (C). If valid, the authorization server responds back with an access token and optionally, a refresh token.

4.1.1. Authorization Request

The client constructs the request URI by adding the following parameters to the query component of the authorization endpoint URI using the application/x-www-form-urlencoded format, per Appendix Appendix B:
response_type

REQUIRED. Value MUST be set to code.
client_id

REQUIRED. The client identifier as described in Section 2.2.
redirect_uri

OPTIONAL. As described in Section 3.1.2.
scope

OPTIONAL. The scope of the access request as described by Section 3.3.
state

RECOMMENDED. An opaque value used by the client to maintain state between the request and callback. The authorization server includes this value when redirecting the user-agent back to the client. The parameter SHOULD be used for preventing cross-site request forgery as described in Section 10.12.
The client directs the resource owner to the constructed URI using an HTTP redirection response, or by other means available to it via the user-agent.
For example, the client directs the user-agent to make the following HTTP request using TLS (with extra line breaks for display purposes only):
  GET /authorize?response_type=code&client_id=s6BhdRkqt3&state=xyz
      &redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb HTTP/1.1
  Host: server.example.com
The authorization server validates the request to ensure all required parameters are present and valid. If the request is valid, the authorization server authenticates the resource owner and obtains an authorization decision (by asking the resource owner or by establishing approval via other means).
When a decision is established, the authorization server directs the user-agent to the provided client redirection URI using an HTTP redirection response, or by other means available to it via the user-agent.

4.1.2. Authorization Response

If the resource owner grants the access request, the authorization server issues an authorization code and delivers it to the client by adding the following parameters to the query component of the redirection URI using the application/x-www-form-urlencoded format, per Appendix Appendix B:
code

REQUIRED. The authorization code generated by the authorization server. The authorization code MUST expire shortly after it is issued to mitigate the risk of leaks. A maximum authorization code lifetime of 10 minutes is RECOMMENDED. The client MUST NOT use the authorization code more than once. If an authorization code is used more than once, the authorization server MUST deny the request and SHOULD revoke (when possible) all tokens previously issued based on that authorization code. The authorization code is bound to the client identifier and redirection URI.
state

REQUIRED if the state parameter was present in the client authorization request. The exact value received from the client.
For example, the authorization server redirects the user-agent by sending the following HTTP response:
  HTTP/1.1 302 Found
  Location: https://client.example.com/cb?code=SplxlOBeZQQYbYS6WxSbIA
            &state=xyz
The client MUST ignore unrecognized response parameters. The authorization code string size is left undefined by this specification. The client should avoid making assumptions about code value sizes. The authorization server SHOULD document the size of any value it issues.

4.1.2.1. Error Response

If the request fails due to a missing, invalid, or mismatching redirection URI, or if the client identifier is missing or invalid, the authorization server SHOULD inform the resource owner of the error, and MUST NOT automatically redirect the user-agent to the invalid redirection URI.
If the resource owner denies the access request or if the request fails for reasons other than a missing or invalid redirection URI, the authorization server informs the client by adding the following parameters to the query component of the redirection URI using the application/x-www-form-urlencoded format, per Appendix Appendix B:
error

REQUIRED. A single ASCII [USASCII] error code from the following:
invalid_request

The request is missing a required parameter, includes an invalid parameter value, includes a parameter more than once, or is otherwise malformed.
unauthorized_client

The client is not authorized to request an authorization code using this method.
access_denied

The resource owner or authorization server denied the request.
unsupported_response_type

The authorization server does not support obtaining an authorization code using this method.
invalid_scope

The requested scope is invalid, unknown, or malformed.
server_error

The authorization server encountered an unexpected condition that prevented it from fulfilling the request. (This error code is needed because a 500 Internal Server Error HTTP status code cannot be returned to the client via a HTTP redirect.)
temporarily_unavailable

The authorization server is currently unable to handle the request due to a temporary overloading or maintenance of the server. (This error code is needed because a 503 Service Unavailable HTTP status code cannot be returned to the client via a HTTP redirect.)
Values for the
error parameter MUST NOT include characters outside the set %x20-21 / %x23-5B / %x5D-7E.
error_description

OPTIONAL. A human-readable ASCII [USASCII] text providing additional information, used to assist the client developer in understanding the error that occurred.
Values for the error_description parameter MUST NOT include characters outside the set %x20-21 / %x23-5B / %x5D-7E.
error_uri

OPTIONAL. A URI identifying a human-readable web page with information about the error, used to provide the client developer with additional information about the error.
Values for the error_uri parameter MUST conform to the URI-Reference syntax, and thus MUST NOT include characters outside the set %x21 / %x23-5B / %x5D-7E.
state

REQUIRED if a state parameter was present in the client authorization request. The exact value received from the client.
For example, the authorization server redirects the user-agent by sending the following HTTP response:
  HTTP/1.1 302 Found
  Location: https://client.example.com/cb?error=access_denied&state=xyz

4.1.3. Access Token Request

The client makes a request to the token endpoint by sending the following parameters using the application/x-www-form-urlencoded format per Appendix Appendix B with a character encoding of UTF-8 in the HTTP request entity-body:
grant_type

REQUIRED. Value MUST be set to authorization_code.
code

REQUIRED. The authorization code received from the authorization server.
redirect_uri

REQUIRED, if the redirect_uri parameter was included in the authorization request as described in Section 4.1.1, and their values MUST be identical.
client_id

REQUIRED, if the client is not authenticating with the authorization server as described in Section 3.2.1.
If the client type is confidential or the client was issued client credentials (or assigned other authentication requirements), the client MUST authenticate with the authorization server as described in Section 3.2.1.
For example, the client makes the following HTTP request using TLS (with extra line breaks for display purposes only):
  POST /token HTTP/1.1
  Host: server.example.com
  Authorization: Basic czZCaGRSa3F0MzpnWDFmQmF0M2JW
  Content-Type: application/x-www-form-urlencoded

  grant_type=authorization_code&code=SplxlOBeZQQYbYS6WxSbIA
  &redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb
The authorization server MUST:
  • require client authentication for confidential clients or for any client that was issued client credentials (or with other authentication requirements),
  • authenticate the client if client authentication is included,
  • ensure the authorization code was issued to the authenticated confidential client, or if the client is public, ensure the code was issued to client_id in the request,
  • verify that the authorization code is valid, and
  • ensure that the redirect_uri parameter is present if the redirect_uri parameter was included in the initial authorization request as described in Section 4.1.1, and if included ensure their values are identical.

4.1.4. Access Token Response

If the access token request is valid and authorized, the authorization server issues an access token and optional refresh token as described in Section 5.1. If the request client authentication failed or is invalid, the authorization server returns an error response as described in Section 5.2.
An example successful response:
  HTTP/1.1 200 OK
  Content-Type: application/json;charset=UTF-8
  Cache-Control: no-store
  Pragma: no-cache

  {
    "access_token":"2YotnFZFEjr1zCsicMWpAA",
    "token_type":"example",
    "expires_in":3600,
    "refresh_token":"tGzv3JOkF0XG5Qx2TlKWIA",
    "example_parameter":"example_value"
  }

4.2. Implicit Grant

The implicit grant type is used to obtain access tokens (it does not support the issuance of refresh tokens) and is optimized for public clients known to operate a particular redirection URI. These clients are typically implemented in a browser using a scripting language such as JavaScript.
As a redirection-based flow, the client must be capable of interacting with the resource owner's user-agent (typically a web browser) and capable of receiving incoming requests (via redirection) from the authorization server.
Unlike the authorization code grant type in which the client makes separate requests for authorization and access token, the client receives the access token as the result of the authorization request.
The implicit grant type does not include client authentication, and relies on the presence of the resource owner and the registration of the redirection URI. Because the access token is encoded into the redirection URI, it may be exposed to the resource owner and other applications residing on the same device.
  +----------+
  | Resource |
  |  Owner   |
  |          |
  +----------+
       ^
       |
      (B)      
  +----|-----+          Client Identifier     +---------------+
  |         -+----(A)-- & Redirection URI --->|               |
  |  User-   |                                | Authorization |
  |  Agent  -|----(B)-- User authenticates -->|     Server    |
  |          |                                |               |
  |          |<---(C)--- Redirection URI ----<|               |
  |          |          with Access Token     +---------------+
  |          |            in Fragment
  |          |                                +---------------+
  |          |----(D)--- Redirection URI ---->|   Web-Hosted  |
  |          |          without Fragment      |     Client    |
  |          |                                |    Resource   |
  |     (F)  |<---(E)------- Script ---------<|               |
  |          |                                +---------------+
  +-|--------+
    |    |    
   (A)  (G) Access Token
    |    |
    ^    v
  +---------+
  |         |
  |  Client |
  |         |
  +---------+
Note: The lines illustrating steps A and B are broken into two parts as they pass through the user-agent.
The flow illustrated in Figure 12 includes the following steps:
(%C)
The client initiates the flow by directing the resource owner's user-agent to the authorization endpoint. The client includes its client identifier, requested scope, local state, and a redirection URI to which the authorization server will send the user-agent back once access is granted (or denied).
(%C)
The authorization server authenticates the resource owner (via the user-agent) and establishes whether the resource owner grants or denies the client's access request.
(%C)
Assuming the resource owner grants access, the authorization server redirects the user-agent back to the client using the redirection URI provided earlier. The redirection URI includes the access token in the URI fragment.
(%C)
The user-agent follows the redirection instructions by making a request to the web-hosted client resource (which does not include the fragment per [RFC2616]). The user-agent retains the fragment information locally.
(%C)
The web-hosted client resource returns a web page (typically an HTML document with an embedded script) capable of accessing the full redirection URI including the fragment retained by the user-agent, and extracting the access token (and other parameters) contained in the fragment.
(%C)
The user-agent executes the script provided by the web-hosted client resource locally, which extracts the access token and passes it to the client.
See Section 1.3.2 and Section 9 for background on using the implicit grant. See Section 10.3 and Section 10.16 for important security considerations when using the implicit grant.

4.2.1. Authorization Request

The client constructs the request URI by adding the following parameters to the query component of the authorization endpoint URI using the application/x-www-form-urlencoded format, per Appendix Appendix B:
response_type

REQUIRED. Value MUST be set to token.
client_id

REQUIRED. The client identifier as described in Section 2.2.
redirect_uri

OPTIONAL. As described in Section 3.1.2.
scope

OPTIONAL. The scope of the access request as described by Section 3.3.
state

RECOMMENDED. An opaque value used by the client to maintain state between the request and callback. The authorization server includes this value when redirecting the user-agent back to the client. The parameter SHOULD be used for preventing cross-site request forgery as described in Section 10.12.
The client directs the resource owner to the constructed URI using an HTTP redirection response, or by other means available to it via the user-agent.
For example, the client directs the user-agent to make the following HTTP request using TLS (with extra line breaks for display purposes only):
  GET /authorize?response_type=token&client_id=s6BhdRkqt3&state=xyz
      &redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb HTTP/1.1
  Host: server.example.com
The authorization server validates the request to ensure all required parameters are present and valid. The authorization server MUST verify that the redirection URI to which it will redirect the access token matches a redirection URI registered by the client as described in Section 3.1.2.
If the request is valid, the authorization server authenticates the resource owner and obtains an authorization decision (by asking the resource owner or by establishing approval via other means).
When a decision is established, the authorization server directs the user-agent to the provided client redirection URI using an HTTP redirection response, or by other means available to it via the user-agent.

4.2.2. Access Token Response

If the resource owner grants the access request, the authorization server issues an access token and delivers it to the client by adding the following parameters to the fragment component of the redirection URI using the application/x-www-form-urlencoded format, per Appendix Appendix B:
access_token

REQUIRED. The access token issued by the authorization server.
token_type

REQUIRED. The type of the token issued as described in Section 7.1. Value is case insensitive.
expires_in

RECOMMENDED. The lifetime in seconds of the access token. For example, the value 3600 denotes that the access token will expire in one hour from the time the response was generated. If omitted, the authorization server SHOULD provide the expiration time via other means or document the default value.
scope

OPTIONAL, if identical to the scope requested by the client, otherwise REQUIRED. The scope of the access token as described by Section 3.3.
state

REQUIRED if the state parameter was present in the client authorization request. The exact value received from the client.
The authorization server MUST NOT issue a refresh token.
For example, the authorization server redirects the user-agent by sending the following HTTP response (with extra line breaks for display purposes only):
  HTTP/1.1 302 Found
  Location: http://example.com/cb#access_token=2YotnFZFEjr1zCsicMWpAA
            &state=xyz&token_type=example&expires_in=3600
Developers should note that some user-agents do not support the inclusion of a fragment component in the HTTP Location response header field. Such clients will require using other methods for redirecting the client than a 3xx redirection response. For example, returning an HTML page that includes a 'continue' button with an action linked to the redirection URI.
The client MUST ignore unrecognized response parameters. The access token string size is left undefined by this specification. The client should avoid making assumptions about value sizes. The authorization server SHOULD document the size of any value it issues.

4.2.2.1. Error Response

If the request fails due to a missing, invalid, or mismatching redirection URI, or if the client identifier is missing or invalid, the authorization server SHOULD inform the resource owner of the error, and MUST NOT automatically redirect the user-agent to the invalid redirection URI.
If the resource owner denies the access request or if the request fails for reasons other than a missing or invalid redirection URI, the authorization server informs the client by adding the following parameters to the fragment component of the redirection URI using the application/x-www-form-urlencoded format, per Appendix Appendix B:
error

REQUIRED. A single ASCII [USASCII] error code from the following:
invalid_request

The request is missing a required parameter, includes an invalid parameter value, includes a parameter more than once, or is otherwise malformed.
unauthorized_client

The client is not authorized to request an access token using this method.
access_denied

The resource owner or authorization server denied the request.
unsupported_response_type

The authorization server does not support obtaining an access token using this method.
invalid_scope

The requested scope is invalid, unknown, or malformed.
server_error

The authorization server encountered an unexpected condition that prevented it from fulfilling the request. (This error code is needed because a 500 Internal Server Error HTTP status code cannot be returned to the client via a HTTP redirect.)
temporarily_unavailable

The authorization server is currently unable to handle the request due to a temporary overloading or maintenance of the server. (This error code is needed because a 503 Service Unavailable HTTP status code cannot be returned to the client via a HTTP redirect.)
Values for the
error parameter MUST NOT include characters outside the set %x20-21 / %x23-5B / %x5D-7E.
error_description

OPTIONAL. A human-readable ASCII [USASCII] text providing additional information, used to assist the client developer in understanding the error that occurred.
Values for the error_description parameter MUST NOT include characters outside the set %x20-21 / %x23-5B / %x5D-7E.
error_uri

OPTIONAL. A URI identifying a human-readable web page with information about the error, used to provide the client developer with additional information about the error.
Values for the error_uri parameter MUST conform to the URI-Reference syntax, and thus MUST NOT include characters outside the set %x21 / %x23-5B / %x5D-7E.
state

REQUIRED if a state parameter was present in the client authorization request. The exact value received from the client.
For example, the authorization server redirects the user-agent by sending the following HTTP response:
  HTTP/1.1 302 Found
  Location: https://client.example.com/cb#error=access_denied&state=xyz

4.3. Resource Owner Password Credentials Grant

The resource owner password credentials grant type is suitable in cases where the resource owner has a trust relationship with the client, such as the device operating system or a highly privileged application. The authorization server should take special care when enabling this grant type, and only allow it when other flows are not viable.
The grant type is suitable for clients capable of obtaining the resource owner's credentials (username and password, typically using an interactive form). It is also used to migrate existing clients using direct authentication schemes such as HTTP Basic or Digest authentication to OAuth by converting the stored credentials to an access token.
  +----------+
  | Resource |
  |  Owner   |
  |          |
  +----------+
       v
       |    Resource Owner
      (A) Password Credentials
       |
       v
  +---------+                                  +---------------+
  |         |>--(B)---- Resource Owner ------->|               |
  |         |         Password Credentials     | Authorization |
  | Client  |                                  |     Server    |
  |         |<--(C)---- Access Token ---------<|               |
  |         |    (w/ Optional Refresh Token)   |               |
  +---------+                                  +---------------+
The flow illustrated in Figure 16 includes the following steps:
(%C)
The resource owner provides the client with its username and password.
(%C)
The client requests an access token from the authorization server's token endpoint by including the credentials received from the resource owner. When making the request, the client authenticates with the authorization server.
(%C)
The authorization server authenticates the client and validates the resource owner credentials, and if valid issues an access token.

4.3.1. Authorization Request and Response

The method through which the client obtains the resource owner credentials is beyond the scope of this specification. The client MUST discard the credentials once an access token has been obtained.

4.3.2. Access Token Request

The client makes a request to the token endpoint by adding the following parameters using the application/x-www-form-urlencoded format per Appendix Appendix B with a character encoding of UTF-8 in the HTTP request entity-body:
grant_type

REQUIRED. Value MUST be set to password.
username

REQUIRED. The resource owner username.
password

REQUIRED. The resource owner password.
scope

OPTIONAL. The scope of the access request as described by Section 3.3.
If the client type is confidential or the client was issued client credentials (or assigned other authentication requirements), the client MUST authenticate with the authorization server as described in Section 3.2.1.
For example, the client makes the following HTTP request using transport-layer security (with extra line breaks for display purposes only):
  POST /token HTTP/1.1
  Host: server.example.com
  Authorization: Basic czZCaGRSa3F0MzpnWDFmQmF0M2JW
  Content-Type: application/x-www-form-urlencoded

  grant_type=password&username=johndoe&password=A3ddj3w
The authorization server MUST:
  • require client authentication for confidential clients or for any client that was issued client credentials (or with other authentication requirements),
  • authenticate the client if client authentication is included, and
  • validate the resource owner password credentials using its existing password validation algorithm.
Since this access token request utilizes the resource owner's password, the authorization server MUST protect the endpoint against brute force attacks (e.g. using rate-limitation or generating alerts).

4.3.3. Access Token Response

If the access token request is valid and authorized, the authorization server issues an access token and optional refresh token as described in Section 5.1. If the request failed client authentication or is invalid, the authorization server returns an error response as described in Section 5.2.
An example successful response:
  HTTP/1.1 200 OK
  Content-Type: application/json;charset=UTF-8
  Cache-Control: no-store
  Pragma: no-cache

  {
    "access_token":"2YotnFZFEjr1zCsicMWpAA",
    "token_type":"example",
    "expires_in":3600,
    "refresh_token":"tGzv3JOkF0XG5Qx2TlKWIA",
    "example_parameter":"example_value"
  }

4.4. Client Credentials Grant

The client can request an access token using only its client credentials (or other supported means of authentication) when the client is requesting access to the protected resources under its control, or those of another resource owner that have been previously arranged with the authorization server (the method of which is beyond the scope of this specification).
The client credentials grant type MUST only be used by confidential clients.
  +---------+                                  +---------------+
  |         |                                  |               |
  |         |>--(A)- Client Authentication --->| Authorization |
  | Client  |                                  |     Server    |
  |         |<--(B)---- Access Token ---------<|               |
  |         |                                  |               |
  +---------+                                  +---------------+
The flow illustrated in Figure 19 includes the following steps:
(%C)
The client authenticates with the authorization server and requests an access token from the token endpoint.
(%C)
The authorization server authenticates the client, and if valid issues an access token.

4.4.1. Authorization Request and Response

Since the client authentication is used as the authorization grant, no additional authorization request is needed.

4.4.2. Access Token Request

The client makes a request to the token endpoint by adding the following parameters using the application/x-www-form-urlencoded format per Appendix Appendix B with a character encoding of UTF-8 in the HTTP request entity-body:
grant_type

REQUIRED. Value MUST be set to client_credentials.
scope

OPTIONAL. The scope of the access request as described by Section 3.3.
The client MUST authenticate with the authorization server as described in Section 3.2.1.
For example, the client makes the following HTTP request using transport-layer security (with extra line breaks for display purposes only):
  POST /token HTTP/1.1
  Host: server.example.com
  Authorization: Basic czZCaGRSa3F0MzpnWDFmQmF0M2JW
  Content-Type: application/x-www-form-urlencoded

  grant_type=client_credentials
The authorization server MUST authenticate the client.

4.4.3. Access Token Response

If the access token request is valid and authorized, the authorization server issues an access token as described in Section 5.1. A refresh token SHOULD NOT be included. If the request failed client authentication or is invalid, the authorization server returns an error response as described in Section 5.2.
An example successful response:
  HTTP/1.1 200 OK
  Content-Type: application/json;charset=UTF-8
  Cache-Control: no-store
  Pragma: no-cache

  {
    "access_token":"2YotnFZFEjr1zCsicMWpAA",
    "token_type":"example",
    "expires_in":3600,
    "example_parameter":"example_value"
  }

4.5. Extension Grants

The client uses an extension grant type by specifying the grant type using an absolute URI (defined by the authorization server) as the value of the grant_type parameter of the token endpoint, and by adding any additional parameters necessary.
For example, to request an access token using a SAML 2.0 assertion grant type as defined by [I-D.ietf-oauth-saml2-bearer], the client could make the following HTTP request using TLS (with extra line breaks for display purposes only):
  POST /token HTTP/1.1
  Host: server.example.com
  Content-Type: application/x-www-form-urlencoded

  grant_type=urn%3Aietf%3Aparams%3Aoauth%3Agrant-type%3Asaml2-
  bearer&assertion=PEFzc2VydGlvbiBJc3N1ZUluc3RhbnQ9IjIwMTEtMDU
  [...omitted for brevity...]aG5TdGF0ZW1lbnQ-PC9Bc3NlcnRpb24-
If the access token request is valid and authorized, the authorization server issues an access token and optional refresh token as described in Section 5.1. If the request failed client authentication or is invalid, the authorization server returns an error response as described in Section 5.2.

5. Issuing an Access Token

If the access token request is valid and authorized, the authorization server issues an access token and optional refresh token as described in Section 5.1. If the request failed client authentication or is invalid, the authorization server returns an error response as described in Section 5.2.

5.1. Successful Response

The authorization server issues an access token and optional refresh token, and constructs the response by adding the following parameters to the entity body of the HTTP response with a 200 (OK) status code:
access_token

REQUIRED. The access token issued by the authorization server.
token_type

REQUIRED. The type of the token issued as described in Section 7.1. Value is case insensitive.
expires_in

RECOMMENDED. The lifetime in seconds of the access token. For example, the value 3600 denotes that the access token will expire in one hour from the time the response was generated. If omitted, the authorization server SHOULD provide the expiration time via other means or document the default value.
refresh_token

OPTIONAL. The refresh token, which can be used to obtain new access tokens using the same authorization grant as described in Section 6.
scope

OPTIONAL, if identical to the scope requested by the client, otherwise REQUIRED. The scope of the access token as described by Section 3.3.
The parameters are included in the entity body of the HTTP response using the application/json media type as defined by [RFC4627]. The parameters are serialized into a JSON structure by adding each parameter at the highest structure level. Parameter names and string values are included as JSON strings. Numerical values are included as JSON numbers. The order of parameters does not matter and can vary.
The authorization server MUST include the HTTP Cache-Control response header field [RFC2616] with a value of no-store in any response containing tokens, credentials, or other sensitive information, as well as the Pragma response header field [RFC2616] with a value of no-cache.
For example:
  HTTP/1.1 200 OK
  Content-Type: application/json;charset=UTF-8
  Cache-Control: no-store
  Pragma: no-cache

  {
    "access_token":"2YotnFZFEjr1zCsicMWpAA",
    "token_type":"example",
    "expires_in":3600,
    "refresh_token":"tGzv3JOkF0XG5Qx2TlKWIA",
    "example_parameter":"example_value"
  }
The client MUST ignore unrecognized value names in the response. The sizes of tokens and other values received from the authorization server are left undefined. The client should avoid making assumptions about value sizes. The authorization server SHOULD document the size of any value it issues.

5.2. Error Response

The authorization server responds with an HTTP 400 (Bad Request) status code (unless specified otherwise) and includes the following parameters with the response:
error

REQUIRED. A single ASCII [USASCII] error code from the following:
invalid_request

The request is missing a required parameter, includes an unsupported parameter value (other than grant type), repeats a parameter, includes multiple credentials, utilizes more than one mechanism for authenticating the client, or is otherwise malformed.
invalid_client

Client authentication failed (e.g. unknown client, no client authentication included, or unsupported authentication method). The authorization server MAY return an HTTP 401 (Unauthorized) status code to indicate which HTTP authentication schemes are supported. If the client attempted to authenticate via theAuthorization request header field, the authorization server MUST respond with an HTTP 401 (Unauthorized) status code, and include the WWW-Authenticate response header field matching the authentication scheme used by the client.
invalid_grant

The provided authorization grant (e.g. authorization code, resource owner credentials) or refresh token is invalid, expired, revoked, does not match the redirection URI used in the authorization request, or was issued to another client.
unauthorized_client

The authenticated client is not authorized to use this authorization grant type.
unsupported_grant_type

The authorization grant type is not supported by the authorization server.
invalid_scope

The requested scope is invalid, unknown, malformed, or exceeds the scope granted by the resource owner.
Values for the
error parameter MUST NOT include characters outside the set %x20-21 / %x23-5B / %x5D-7E.
error_description

OPTIONAL. A human-readable ASCII [USASCII] text providing additional information, used to assist the client developer in understanding the error that occurred.
Values for the error_description parameter MUST NOT include characters outside the set %x20-21 / %x23-5B / %x5D-7E.
error_uri

OPTIONAL. A URI identifying a human-readable web page with information about the error, used to provide the client developer with additional information about the error.
Values for the error_uri parameter MUST conform to the URI-Reference syntax, and thus MUST NOT include characters outside the set %x21 / %x23-5B / %x5D-7E.
The parameters are included in the entity body of the HTTP response using the application/json media type as defined by [RFC4627]. The parameters are serialized into a JSON structure by adding each parameter at the highest structure level. Parameter names and string values are included as JSON strings. Numerical values are included as JSON numbers. The order of parameters does not matter and can vary.
For example:
  HTTP/1.1 400 Bad Request
  Content-Type: application/json;charset=UTF-8
  Cache-Control: no-store
  Pragma: no-cache

  {
    "error":"invalid_request"
  }

6. Refreshing an Access Token

If the authorization server issued a refresh token to the client, the client makes a refresh request to the token endpoint by adding the following parameters using theapplication/x-www-form-urlencoded format per Appendix Appendix B with a character encoding of UTF-8 in the HTTP request entity-body:
grant_type

REQUIRED. Value MUST be set to refresh_token.
refresh_token

REQUIRED. The refresh token issued to the client.
scope

OPTIONAL. The scope of the access request as described by Section 3.3. The requested scope MUST NOT include any scope not originally granted by the resource owner, and if omitted is treated as equal to the scope originally granted by the resource owner.
Because refresh tokens are typically long-lasting credentials used to request additional access tokens, the refresh token is bound to the client to which it was issued. If the client type is confidential or the client was issued client credentials (or assigned other authentication requirements), the client MUST authenticate with the authorization server as described in Section 3.2.1.
For example, the client makes the following HTTP request using transport-layer security (with extra line breaks for display purposes only):
  POST /token HTTP/1.1
  Host: server.example.com
  Authorization: Basic czZCaGRSa3F0MzpnWDFmQmF0M2JW
  Content-Type: application/x-www-form-urlencoded

  grant_type=refresh_token&refresh_token=tGzv3JOkF0XG5Qx2TlKWIA
The authorization server MUST:
  • require client authentication for confidential clients or for any client that was issued client credentials (or with other authentication requirements),
  • authenticate the client if client authentication is included and ensure the refresh token was issued to the authenticated client, and
  • validate the refresh token.
If valid and authorized, the authorization server issues an access token as described in Section 5.1. If the request failed verification or is invalid, the authorization server returns an error response as described in Section 5.2.
The authorization server MAY issue a new refresh token, in which case the client MUST discard the old refresh token and replace it with the new refresh token. The authorization server MAY revoke the old refresh token after issuing a new refresh token to the client. If a new refresh token is issued, the refresh token scope MUST be identical to that of the refresh token included by the client in the request.

7. Accessing Protected Resources

The client accesses protected resources by presenting the access token to the resource server. The resource server MUST validate the access token and ensure it has not expired and that its scope covers the requested resource. The methods used by the resource server to validate the access token (as well as any error responses) are beyond the scope of this specification, but generally involve an interaction or coordination between the resource server and the authorization server.
The method in which the client utilizes the access token to authenticate with the resource server depends on the type of access token issued by the authorization server. Typically, it involves using the HTTP Authorization request header field [RFC2617] with an authentication scheme defined by the access token type specification.

7.1. Access Token Types

The access token type provides the client with the information required to successfully utilize the access token to make a protected resource request (along with type-specific attributes). The client MUST NOT use an access token if it does not understand the token type.
For example, the bearer token type defined in [I-D.ietf-oauth-v2-bearer] is utilized by simply including the access token string in the request:
  GET /resource/1 HTTP/1.1
  Host: example.com
  Authorization: Bearer mF_9.B5f-4.1JqM
while the mac token type defined in [I-D.ietf-oauth-v2-http-mac] is utilized by issuing a MAC key together with the access token that is used to sign certain components of the HTTP requests:
  GET /resource/1 HTTP/1.1
  Host: example.com
  Authorization: MAC id="h480djs93hd8",
                     nonce="274312:dj83hs9s",
                     mac="kDZvddkndxvhGRXZhvuDjEWhGeE="
The above examples are provided for illustration purposes only. Developers are advised to consult the [I-D.ietf-oauth-v2-bearer] and [I-D.ietf-oauth-v2-http-mac] specifications before use.
Each access token type definition specifies the additional attributes (if any) sent to the client together with the access_token response parameter. It also defines the HTTP authentication method used to include the access token when making a protected resource request.

7.2. Error Response

If a resource access request fails, the resource server SHOULD inform the client of the error. While the specifics of such error responses are beyond the scope of this specification, this documents establishes a common registry in Section 11.4 for error values to be shared among OAuth token authentication schemes.
New authentication schemes designed primarily for OAuth token authentication SHOULD define a mechanism for providing an error status code to the client, in which the error values allowed are registered in the error registry established by this specification. Such schemes MAY limit the set of valid error codes to a subset of the registered values. If the error code is returned using a named parameter, the parameter name SHOULD be error.
Other schemes capable of being used for OAuth token authentication, but not primarily designed for that purpose, MAY bind their error values to the registry in the same manner.
New authentication schemes MAY choose to also specify the use of the error_description and error_uri parameters to return error information in a manner parallel to their usage in this specification.

8. Extensibility

8.1. Defining Access Token Types

Access token types can be defined in one of two ways: registered in the access token type registry (following the procedures in Section 11.1), or by using a unique absolute URI as its name.
Types utilizing a URI name SHOULD be limited to vendor-specific implementations that are not commonly applicable, and are specific to the implementation details of the resource server where they are used.
All other types MUST be registered. Type names MUST conform to the type-name ABNF. If the type definition includes a new HTTP authentication scheme, the type name SHOULD be identical to the HTTP authentication scheme name (as defined by [RFC2617]). The token type example is reserved for use in examples.
  type-name  = 1*name-char
  name-char  = "-" / "." / "_" / DIGIT / ALPHA

8.2. Defining New Endpoint Parameters

New request or response parameters for use with the authorization endpoint or the token endpoint are defined and registered in the parameters registry following the procedure inSection 11.2.
Parameter names MUST conform to the param-name ABNF and parameter values syntax MUST be well-defined (e.g., using ABNF, or a reference to the syntax of an existing parameter).
  param-name  = 1*name-char
  name-char   = "-" / "." / "_" / DIGIT / ALPHA
Unregistered vendor-specific parameter extensions that are not commonly applicable, and are specific to the implementation details of the authorization server where they are used SHOULD utilize a vendor-specific prefix that is not likely to conflict with other registered values (e.g. begin with 'companyname_').

8.3. Defining New Authorization Grant Types

New authorization grant types can be defined by assigning them a unique absolute URI for use with the grant_type parameter. If the extension grant type requires additional token endpoint parameters, they MUST be registered in the OAuth parameters registry as described by Section 11.2.

8.4. Defining New Authorization Endpoint Response Types

New response types for use with the authorization endpoint are defined and registered in the authorization endpoint response type registry following the procedure in Section 11.3. Response type names MUST conform to the response-type ABNF.
  response-type  = response-name *( SP response-name )
  response-name  = 1*response-char
  response-char  = "_" / DIGIT / ALPHA
If a response type contains one or more space characters (%x20), it is compared as a space-delimited list of values in which the order of values does not matter. Only one order of values can be registered, which covers all other arrangements of the same set of values.
For example, the response type token code is left undefined by this specification. However, an extension can define and register the token code response type. Once registered, the same combination cannot be registered as code token, but both values can be used to denote the same response type.

8.5. Defining Additional Error Codes

In cases where protocol extensions (i.e. access token types, extension parameters, or extension grant types) require additional error codes to be used with the authorization code grant error response (Section 4.1.2.1), the implicit grant error response (Section 4.2.2.1), the token error response (Section 5.2), or the resource access error response (Section 7.2), such error codes MAY be defined.
Extension error codes MUST be registered (following the procedures in Section 11.4) if the extension they are used in conjunction with is a registered access token type, a registered endpoint parameter, or an extension grant type. Error codes used with unregistered extensions MAY be registered.
Error codes MUST conform to the error ABNF, and SHOULD be prefixed by an identifying name when possible. For example, an error identifying an invalid value set to the extension parameter example SHOULD be named example_invalid.
  error      = 1*error-char
  error-char = %x20-21 / %x23-5B / %x5D-7E

9. Native Applications

Native applications are clients installed and executed on the device used by the resource owner (i.e. desktop application, native mobile application). Native applications require special consideration related to security, platform capabilities, and overall end-user experience.
The authorization endpoint requires interaction between the client and the resource owner's user-agent. Native applications can invoke an external user-agent or embed a user-agent within the application. For example:
  • External user-agent - the native application can capture the response from the authorization server using a redirection URI with a scheme registered with the operating system to invoke the client as the handler, manual copy-and-paste of the credentials, running a local web server, installing a user-agent extension, or by providing a redirection URI identifying a server-hosted resource under the client's control, which in turn makes the response available to the native application.
  • Embedded user-agent - the native application obtains the response by directly communicating with the embedded user-agent by monitoring state changes emitted during the resource load, or accessing the user-agent's cookies storage.
When choosing between an external or embedded user-agent, developers should consider:
  • An External user-agent may improve completion rate as the resource owner may already have an active session with the authorization server removing the need to re-authenticate. It provides a familiar end-user experience and functionality. The resource owner may also rely on user-agent features or extensions to assist with authentication (e.g. password manager, 2-factor device reader).
  • An embedded user-agent may offer improved usability, as it removes the need to switch context and open new windows.
  • An embedded user-agent poses a security challenge because resource owners are authenticating in an unidentified window without access to the visual protections found in most external user-agents. An embedded user-agent educates end-users to trust unidentified requests for authentication (making phishing attacks easier to execute).
When choosing between the implicit grant type and the authorization code grant type, the following should be considered:
  • Native applications that use the authorization code grant type SHOULD do so without using client credentials, due to the native application's inability to keep client credentials confidential.
  • When using the implicit grant type flow, a refresh token is not returned, which requires repeating the authorization process once the access token expires.

10. Security Considerations

As a flexible and extensible framework, OAuth's security considerations depend on many factors. The following sections provide implementers with security guidelines focused on the three client profiles described in Section 2.1: web application, user-agent-based application, and native application.
A comprehensive OAuth security model and analysis, as well as background for the protocol design, is provided by [I-D.ietf-oauth-v2-threatmodel].

10.1. Client Authentication

The authorization server establishes client credentials with web application clients for the purpose of client authentication. The authorization server is encouraged to consider stronger client authentication means than a client password. Web application clients MUST ensure confidentiality of client passwords and other client credentials.
The authorization server MUST NOT issue client passwords or other client credentials to native application or user-agent-based application clients for the purpose of client authentication. The authorization server MAY issue a client password or other credentials for a specific installation of a native application client on a specific device.
When client authentication is not possible, the authorization server SHOULD employ other means to validate the client's identity. For example, by requiring the registration of the client redirection URI or enlisting the resource owner to confirm identity. A valid redirection URI is not sufficient to verify the client's identity when asking for resource owner authorization, but can be used to prevent delivering credentials to a counterfeit client after obtaining resource owner authorization.
The authorization server must consider the security implications of interacting with unauthenticated clients and take measures to limit the potential exposure of other credentials (e.g. refresh tokens) issued to such clients.

10.2. Client Impersonation

A malicious client can impersonate another client and obtain access to protected resources, if the impersonated client fails to, or is unable to, keep its client credentials confidential.
The authorization server MUST authenticate the client whenever possible. If the authorization server cannot authenticate the client due to the client's nature, the authorization server MUST require the registration of any redirection URI used for receiving authorization responses, and SHOULD utilize other means to protect resource owners from such potentially malicious clients. For example, the authorization server can engage the resource owner to assist in identifying the client and its origin.
The authorization server SHOULD enforce explicit resource owner authentication and provide the resource owner with information about the client and the requested authorization scope and lifetime. It is up to the resource owner to review the information in the context of the current client, and authorize or deny the request.
The authorization server SHOULD NOT process repeated authorization requests automatically (without active resource owner interaction) without authenticating the client or relying on other measures to ensure the repeated request comes from the original client and not an impersonator.

10.3. Access Tokens

Access token credentials (as well as any confidential access token attributes) MUST be kept confidential in transit and storage, and only shared among the authorization server, the resource servers the access token is valid for, and the client to whom the access token is issued. Access token credentials MUST only be transmitted using TLS as described in Section 1.6 with server authentication as defined by [RFC2818].
When using the implicit grant type, the access token is transmitted in the URI fragment, which can expose it to unauthorized parties.
The authorization server MUST ensure that access tokens cannot be generated, modified, or guessed to produce valid access tokens by unauthorized parties.
The client SHOULD request access tokens with the minimal scope necessary. The authorization server SHOULD take the client identity into account when choosing how to honor the requested scope, and MAY issue an access token with a less rights than requested.
This specification does not provide any methods for the resource server to ensure that an access token presented to it by a given client was issued to that client by the authorization server.

10.4. Refresh Tokens

Authorization servers MAY issue refresh tokens to web application clients and native application clients.
Refresh tokens MUST be kept confidential in transit and storage, and shared only among the authorization server and the client to whom the refresh tokens were issued. The authorization server MUST maintain the binding between a refresh token and the client to whom it was issued. Refresh tokens MUST only be transmitted using TLS as described inSection 1.6 with server authentication as defined by [RFC2818].
The authorization server MUST verify the binding between the refresh token and client identity whenever the client identity can be authenticated. When client authentication is not possible, the authorization server SHOULD deploy other means to detect refresh token abuse.
For example, the authorization server could employ refresh token rotation in which a new refresh token is issued with every access token refresh response. The previous refresh token is invalidated but retained by the authorization server. If a refresh token is compromised and subsequently used by both the attacker and the legitimate client, one of them will present an invalidated refresh token, which will inform the authorization server of the breach.
The authorization server MUST ensure that refresh tokens cannot be generated, modified, or guessed to produce valid refresh tokens by unauthorized parties.

10.5. Authorization Codes

The transmission of authorization codes SHOULD be made over a secure channel, and the client SHOULD require the use of TLS with its redirection URI if the URI identifies a network resource. Since authorization codes are transmitted via user-agent redirections, they could potentially be disclosed through user-agent history and HTTP referrer headers.
Authorization codes operate as plaintext bearer credentials, used to verify that the resource owner who granted authorization at the authorization server is the same resource owner returning to the client to complete the process. Therefore, if the client relies on the authorization code for its own resource owner authentication, the client redirection endpoint MUST require the use of TLS.
Authorization codes MUST be short lived and single use. If the authorization server observes multiple attempts to exchange an authorization code for an access token, the authorization server SHOULD attempt to revoke all access tokens already granted based on the compromised authorization code.
If the client can be authenticated, the authorization servers MUST authenticate the client and ensure that the authorization code was issued to the same client.

10.6. Authorization Code Redirection URI Manipulation

When requesting authorization using the authorization code grant type, the client can specify a redirection URI via the redirect_uri parameter. If an attacker can manipulate the value of the redirection URI, it can cause the authorization server to redirect the resource owner user-agent to a URI under the control of the attacker with the authorization code.
An attacker can create an account at a legitimate client and initiate the authorization flow. When the attacker's user-agent is sent to the authorization server to grant access, the attacker grabs the authorization URI provided by the legitimate client, and replaces the client's redirection URI with a URI under the control of the attacker. The attacker then tricks the victim into following the manipulated link to authorize access to the legitimate client.
Once at the authorization server, the victim is prompted with a normal, valid request on behalf of a legitimate and trusted client, and authorizes the request. The victim is then redirected to an endpoint under the control of the attacker with the authorization code. The attacker completes the authorization flow by sending the authorization code to the client using the original redirection URI provided by the client. The client exchanges the authorization code with an access token and links it to the attacker's client account, which can now gain access to the protected resources authorized by the victim (via the client).
In order to prevent such an attack, the authorization server MUST ensure that the redirection URI used to obtain the authorization code is identical to the redirection URI provided when exchanging the authorization code for an access token. The authorization server MUST require public clients and SHOULD require confidential clients to register their redirection URIs. If a redirection URI is provided in the request, the authorization server MUST validate it against the registered value.

10.7. Resource Owner Password Credentials

The resource owner password credentials grant type is often used for legacy or migration reasons. It reduces the overall risk of storing username and password by the client, but does not eliminate the need to expose highly privileged credentials to the client.
This grant type carries a higher risk than other grant types because it maintains the password anti-pattern this protocol seeks to avoid. The client could abuse the password or the password could unintentionally be disclosed to an attacker (e.g. via log files or other records kept by the client).
Additionally, because the resource owner does not have control over the authorization process (the resource owner involvement ends when it hands over its credentials to the client), the client can obtain access tokens with a broader scope than desired by the resource owner. The authorization server should consider the scope and lifetime of access tokens issued via this grant type.
The authorization server and client SHOULD minimize use of this grant type and utilize other grant types whenever possible.

10.8. Request Confidentiality

Access tokens, refresh tokens, resource owner passwords, and client credentials MUST NOT be transmitted in the clear. Authorization codes SHOULD NOT be transmitted in the clear.
The state and scope parameters SHOULD NOT include sensitive client or resource owner information in plain text as they can be transmitted over insecure channels or stored insecurely.

10.9. Endpoints Authenticity

In order to prevent man-in-the-middle attacks, the authorization server MUST require the use of TLS with server authentication as defined by [RFC2818] for any request sent to the authorization and token endpoints. The client MUST validate the authorization server's TLS certificate as defined by [RFC6125], and in accordance with its requirements for server identity authentication.

10.10. Credentials Guessing Attacks

The authorization server MUST prevent attackers from guessing access tokens, authorization codes, refresh tokens, resource owner passwords, and client credentials.
The probability of an attacker guessing generated tokens (and other credentials not intended for handling by end-users) MUST be less than or equal to 2^(-128) and SHOULD be less than or equal to 2^(-160).
The authorization server MUST utilize other means to protect credentials intended for end-user usage.

10.11. Phishing Attacks

Wide deployment of this and similar protocols may cause end-users to become inured to the practice of being redirected to websites where they are asked to enter their passwords. If end-users are not careful to verify the authenticity of these websites before entering their credentials, it will be possible for attackers to exploit this practice to steal resource owners' passwords.
Service providers should attempt to educate end-users about the risks phishing attacks pose, and should provide mechanisms that make it easy for end-users to confirm the authenticity of their sites. Client developers should consider the security implications of how they interact with the user-agent (e.g., external, embedded), and the ability of the end-user to verify the authenticity of the authorization server.
To reduce the risk of phishing attacks, the authorization servers MUST require the use of TLS on every endpoint used for end-user interaction.

10.12. Cross-Site Request Forgery

Cross-site request forgery (CSRF) is an exploit in which an attacker causes the user-agent of a victim end-user to follow a malicious URI (e.g. provided to the user-agent as a misleading link, image, or redirection) to a trusting server (usually established via the presence of a valid session cookie).
A CSRF attack against the client's redirection URI allows an attacker to inject their own authorization code or access token, which can result in the client using an access token associated with the attacker's protected resources rather than the victim's (e.g. save the victim's bank account information to a protected resource controlled by the attacker).
The client MUST implement CSRF protection for its redirection URI. This is typically accomplished by requiring any request sent to the redirection URI endpoint to include a value that binds the request to the user-agent's authenticated state (e.g. a hash of the session cookie used to authenticate the user-agent). The client SHOULD utilize the staterequest parameter to deliver this value to the authorization server when making an authorization request.
Once authorization has been obtained from the end-user, the authorization server redirects the end-user's user-agent back to the client with the required binding value contained in the state parameter. The binding value enables the client to verify the validity of the request by matching the binding value to the user-agent's authenticated state. The binding value used for CSRF protection MUST contain a non-guessable value (as described in Section 10.10), and the user-agent's authenticated state (e.g. session cookie, HTML5 local storage) MUST be kept in a location accessible only to the client and the user-agent (i.e., protected by same-origin policy).
A CSRF attack against the authorization server's authorization endpoint can result in an attacker obtaining end-user authorization for a malicious client without involving or alerting the end-user.
The authorization server MUST implement CSRF protection for its authorization endpoint, and ensure that a malicious client cannot obtain authorization without the awareness and explicit consent of the resource owner.

10.13. Clickjacking

In a clickjacking attack, an attacker registers a legitimate client and then constructs a malicious site in which it loads the authorization server's authorization endpoint web page in a transparent iframe overlaid on top of a set of dummy buttons, which are carefully constructed to be placed directly under important buttons on the authorization page. When an end-user clicks a misleading visible button, the end-user is actually clicking an invisible button on the authorization page (such as an "Authorize" button). This allows an attacker to trick a resource owner into granting its client access without their knowledge.
To prevent this form of attack, native applications SHOULD use external browsers instead of embedding browsers within the application when requesting end-user authorization. For most newer browsers, avoidance of iframes can be enforced by the authorization server using the (non-standard) x-frame-options header. This header can have two values, deny and sameorigin, which will block any framing, or framing by sites with a different origin, respectively. For older browsers, JavaScript framebusting techniques can be used but may not be effective in all browsers.

10.14. Code Injection and Input Validation

A code injection attack occurs when an input or otherwise external variable is used by an application unsanitized and causes modification to the application logic. This may allow an attacker to gain access to the application device or its data, cause denial of service, or a wide range of malicious side-effects.
The Authorization server and client MUST sanitize (and validate when possible) any value received, in particular, the value of the state and redirect_uri parameters.

10.15. Open Redirectors

The authorization server authorization endpoint and the client redirection endpoint can be improperly configured and operate as open redirectors. An open redirector is an endpoint using a parameter to automatically redirect a user-agent to the location specified by the parameter value without any validation.
Open redirectors can be used in phishing attacks, or by an attacker to get end-users to visit malicious sites by making the URI's authority look like a familiar and trusted destination. In addition, if the authorization server allows the client to register only part of the redirection URI, an attacker can use an open redirector operated by the client to construct a redirection URI that will pass the authorization server validation but will send the authorization code or access token to an endpoint under the control of the attacker.

10.16. Misuse of Access Token to Impersonate Resource Owner in Implicit Flow

For public clients using implicit flows, this specification does not provide any method for the client to determine what client an access token was issued to.
A Resource Owner may willingly delegate access to a resource by granting an access token to an attacker's malicious client. This may be due to Phishing or some other pretext. An attacker may also steal a token via some other mechanism. An attacker may then attempt to impersonate the resource owner by providing the access token to a legitimate public client.
In the implicit flow (response_type=token), the attacker can easily switch the token in the response from the authorization server, replacing the real access_token with the one previously issued to the attacker.
Servers communicating with native applications that rely on being passed an access token in the back channel to identify the user of the client may be similarly compromised by an attacker creating a compromised application that can inject arbitrary stolen access tokens.
Any public client that makes the assumption that only the resource owner can present them with a valid access token for the resource is vulnerable to this attack.
This attack may expose information about the resource owner at the legitimate client to the attacker (malicious client). This will also allow the attacker to perform operations at the legitimate client with the same permissions as the resource owner who originally granted the access token or authorization code.
Authenticating Resource Owners to clients is out of scope for this specification. Any specification that uses the authorization process as a form of delegated end-user authentication to the client (e.g. third-party sign-in service) MUST NOT use the implicit flow without additional security mechanisms such as audience restricting the access token that enable the client to determine if the access token was issued for its use.

11. IANA Considerations

11.1. OAuth Access Token Type Registry

This specification establishes the OAuth access token type registry.
Access token types are registered with a Specification Required ([RFC5226]) after a two week review period on the [TBD]@ietf.org mailing list, on the advice of one or more Designated Experts. However, to allow for the allocation of values prior to publication, the Designated Expert(s) may approve registration once they are satisfied that such a specification will be published.
Registration requests must be sent to the [TBD]@ietf.org mailing list for review and comment, with an appropriate subject (e.g., "Request for access token type: example"). [[ Note to RFC-EDITOR: The name of the mailing list should be determined in consultation with the IESG and IANA. Suggested name: oauth-ext-review. ]]
Within the review period, the Designated Expert(s) will either approve or deny the registration request, communicating this decision to the review list and IANA. Denials should include an explanation and, if applicable, suggestions as to how to make the request successful.
IANA must only accept registry updates from the Designated Expert(s), and should direct all requests for registration to the review mailing list.

11.1.1. Registration Template

Type name:

The name requested (e.g., "example").
Additional Token Endpoint Response Parameters:

Additional response parameters returned together with the access_token parameter. New parameters MUST be separately registered in the OAuth parameters registry as described by Section 11.2.
HTTP Authentication Scheme(s):

The HTTP authentication scheme name(s), if any, used to authenticate protected resources requests using access tokens of this type.
Change controller:

For standards-track RFCs, state "IETF". For others, give the name of the responsible party. Other details (e.g., postal address, e-mail address, home page URI) may also be included.
Specification document(s):

Reference to the document that specifies the parameter, preferably including a URI that can be used to retrieve a copy of the document. An indication of the relevant sections may also be included, but is not required.

11.2. OAuth Parameters Registry

This specification establishes the OAuth parameters registry.
Additional parameters for inclusion in the authorization endpoint request, the authorization endpoint response, the token endpoint request, or the token endpoint response are registered with a Specification Required ([RFC5226]) after a two week review period on the [TBD]@ietf.org mailing list, on the advice of one or more Designated Experts. However, to allow for the allocation of values prior to publication, the Designated Expert(s) may approve registration once they are satisfied that such a specification will be published.
Registration requests must be sent to the [TBD]@ietf.org mailing list for review and comment, with an appropriate subject (e.g., "Request for parameter: example"). [[ Note to RFC-EDITOR: The name of the mailing list should be determined in consultation with the IESG and IANA. Suggested name: oauth-ext-review. ]]
Within the review period, the Designated Expert(s) will either approve or deny the registration request, communicating this decision to the review list and IANA. Denials should include an explanation and, if applicable, suggestions as to how to make the request successful.
IANA must only accept registry updates from the Designated Expert(s), and should direct all requests for registration to the review mailing list.

11.2.1. Registration Template

Parameter name:

The name requested (e.g., "example").
Parameter usage location:

The location(s) where parameter can be used. The possible locations are: authorization request, authorization response, token request, or token response.
Change controller:

For standards-track RFCs, state "IETF". For others, give the name of the responsible party. Other details (e.g., postal address, e-mail address, home page URI) may also be included.
Specification document(s):

Reference to the document that specifies the parameter, preferably including a URI that can be used to retrieve a copy of the document. An indication of the relevant sections may also be included, but is not required.

11.2.2. Initial Registry Contents

The OAuth Parameters Registry's initial contents are:
  • Parameter name: client_id
  • Parameter usage location: authorization request, token request
  • Change controller: IETF
  • Specification document(s): [[ this document ]]
  • Parameter name: client_secret
  • Parameter usage location: token request
  • Change controller: IETF
  • Specification document(s): [[ this document ]]
  • Parameter name: response_type
  • Parameter usage location: authorization request
  • Change controller: IETF
  • Specification document(s): [[ this document ]]
  • Parameter name: redirect_uri
  • Parameter usage location: authorization request, token request
  • Change controller: IETF
  • Specification document(s): [[ this document ]]
  • Parameter name: scope
  • Parameter usage location: authorization request, authorization response, token request, token response
  • Change controller: IETF
  • Specification document(s): [[ this document ]]
  • Parameter name: state
  • Parameter usage location: authorization request, authorization response
  • Change controller: IETF
  • Specification document(s): [[ this document ]]
  • Parameter name: code
  • Parameter usage location: authorization response, token request
  • Change controller: IETF
  • Specification document(s): [[ this document ]]
  • Parameter name: error_description
  • Parameter usage location: authorization response, token response
  • Change controller: IETF
  • Specification document(s): [[ this document ]]
  • Parameter name: error_uri
  • Parameter usage location: authorization response, token response
  • Change controller: IETF
  • Specification document(s): [[ this document ]]
  • Parameter name: grant_type
  • Parameter usage location: token request
  • Change controller: IETF
  • Specification document(s): [[ this document ]]
  • Parameter name: access_token
  • Parameter usage location: authorization response, token response
  • Change controller: IETF
  • Specification document(s): [[ this document ]]
  • Parameter name: token_type
  • Parameter usage location: authorization response, token response
  • Change controller: IETF
  • Specification document(s): [[ this document ]]
  • Parameter name: expires_in
  • Parameter usage location: authorization response, token response
  • Change controller: IETF
  • Specification document(s): [[ this document ]]
  • Parameter name: username
  • Parameter usage location: token request
  • Change controller: IETF
  • Specification document(s): [[ this document ]]
  • Parameter name: password
  • Parameter usage location: token request
  • Change controller: IETF
  • Specification document(s): [[ this document ]]
  • Parameter name: refresh_token
  • Parameter usage location: token request, token response
  • Change controller: IETF
  • Specification document(s): [[ this document ]]

11.3. OAuth Authorization Endpoint Response Type Registry

This specification establishes the OAuth authorization endpoint response type registry.
Additional response type for use with the authorization endpoint are registered with a Specification Required ([RFC5226]) after a two week review period on the [TBD]@ietf.org mailing list, on the advice of one or more Designated Experts. However, to allow for the allocation of values prior to publication, the Designated Expert(s) may approve registration once they are satisfied that such a specification will be published.
Registration requests must be sent to the [TBD]@ietf.org mailing list for review and comment, with an appropriate subject (e.g., "Request for response type: example"). [[ Note to RFC-EDITOR: The name of the mailing list should be determined in consultation with the IESG and IANA. Suggested name: oauth-ext-review. ]]
Within the review period, the Designated Expert(s) will either approve or deny the registration request, communicating this decision to the review list and IANA. Denials should include an explanation and, if applicable, suggestions as to how to make the request successful.
IANA must only accept registry updates from the Designated Expert(s), and should direct all requests for registration to the review mailing list.

11.3.1. Registration Template

Response type name:

The name requested (e.g., "example").
Change controller:

For standards-track RFCs, state "IETF". For others, give the name of the responsible party. Other details (e.g., postal address, e-mail address, home page URI) may also be included.
Specification document(s):

Reference to the document that specifies the type, preferably including a URI that can be used to retrieve a copy of the document. An indication of the relevant sections may also be included, but is not required.

11.3.2. Initial Registry Contents

The OAuth Authorization Endpoint Response Type Registry's initial contents are:
  • Response type name: code
  • Change controller: IETF
  • Specification document(s): [[ this document ]]
  • Response type name: token
  • Change controller: IETF
  • Specification document(s): [[ this document ]]

11.4. OAuth Extensions Error Registry

This specification establishes the OAuth extensions error registry.
Additional error codes used together with other protocol extensions (i.e. extension grant types, access token types, or extension parameters) are registered with a Specification Required ([RFC5226]) after a two week review period on the [TBD]@ietf.org mailing list, on the advice of one or more Designated Experts. However, to allow for the allocation of values prior to publication, the Designated Expert(s) may approve registration once they are satisfied that such a specification will be published.
Registration requests must be sent to the [TBD]@ietf.org mailing list for review and comment, with an appropriate subject (e.g., "Request for error code: example"). [[ Note to RFC-EDITOR: The name of the mailing list should be determined in consultation with the IESG and IANA. Suggested name: oauth-ext-review. ]]
Within the review period, the Designated Expert(s) will either approve or deny the registration request, communicating this decision to the review list and IANA. Denials should include an explanation and, if applicable, suggestions as to how to make the request successful.
IANA must only accept registry updates from the Designated Expert(s), and should direct all requests for registration to the review mailing list.

11.4.1. Registration Template

Error name:

The name requested (e.g., "example"). Values for the error name MUST NOT include characters outside the set %x20-21 / %x23-5B / %x5D-7E.
Error usage location:

The location(s) where the error can be used. The possible locations are: authorization code grant error response (Section 4.1.2.1), implicit grant error response (Section 4.2.2.1), token error response (Section 5.2), or resource access error response (Section 7.2).
Related protocol extension:

The name of the extension grant type, access token type, or extension parameter, the error code is used in conjunction with.
Change controller:

For standards-track RFCs, state "IETF". For others, give the name of the responsible party. Other details (e.g., postal address, e-mail address, home page URI) may also be included.
Specification document(s):

Reference to the document that specifies the error code, preferably including a URI that can be used to retrieve a copy of the document. An indication of the relevant sections may also be included, but is not required.

12. References

12.1. Normative References

[RFC2119]Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2246]Dierks, T. and C. Allen, "The TLS Protocol Version 1.0", RFC 2246, January 1999.
[RFC2616]Fielding, R.Gettys, J.Mogul, J.Frystyk, H.Masinter, L.Leach, P. and T. Berners-Lee, "Hypertext Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.
[RFC2617]Franks, J.Hallam-Baker, P.M.Hostetler, J.L.Lawrence, S.D.Leach, P.J.Luotonen, A. and L. Stewart, "HTTP Authentication: Basic and Digest Access Authentication", RFC 2617, June 1999.
[RFC2818]Rescorla, E., "HTTP Over TLS", RFC 2818, May 2000.
[RFC3629]Yergeau, F., "UTF-8, a transformation format of ISO 10646", STD 63, RFC 3629, November 2003.
[RFC3986]Berners-Lee, T.Fielding, R. and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, January 2005.
[RFC4627]Crockford, D., "The application/json Media Type for JavaScript Object Notation (JSON)", RFC 4627, July 2006.
[RFC4949]Shirey, R., "Internet Security Glossary, Version 2", RFC 4949, August 2007.
[RFC5226]Narten, T. and H. Alvestrand, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 5226, May 2008.
[RFC5234]Crocker, D. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, January 2008.
[RFC5246]Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.2", RFC 5246, August 2008.
[RFC6125]Saint-Andre, P. and J. Hodges, "Representation and Verification of Domain-Based Application Service Identity within Internet Public Key Infrastructure Using X.509 (PKIX) Certificates in the Context of Transport Layer Security (TLS)", RFC 6125, March 2011.
[W3C.REC-html401-19991224]Hors, A.Raggett, D. and I. Jacobs, "HTML 4.01 Specification", World Wide Web Consortium Recommendation REC-html401-19991224, December 1999.
[W3C.REC-xml-20081126]Sperberg-McQueen, C.Yergeau, F.Maler, E.Paoli, J. and T. Bray, "Extensible Markup Language (XML) 1.0 (Fifth Edition)", World Wide Web Consortium Recommendation REC-xml-20081126, November 2008.
[USASCII]American National Standards Institute, "Coded Character Set -- 7-bit American Standard Code for Information Interchange", ANSI X3.4, 1986.

12.2. Informative References

[RFC5849]Hammer-Lahav, E., "The OAuth 1.0 Protocol", RFC 5849, April 2010.
[I-D.ietf-oauth-v2-bearer]Jones, MHardt, D and D Recordon, "The OAuth 2.0 Authorization Framework: Bearer Token Usage", Internet-Draft draft-ietf-oauth-v2-bearer-22, July 2012.
[I-D.ietf-oauth-saml2-bearer]Campbell, B and C Mortimore, "SAML 2.0 Bearer Assertion Profiles for OAuth 2.0", Internet-Draft draft-ietf-oauth-saml2-bearer-13, July 2012.
[I-D.ietf-oauth-v2-http-mac]Hammer-Lahav, E, "HTTP Authentication: MAC Access Authentication", Internet-Draft draft-ietf-oauth-v2-http-mac-01, February 2012.
[I-D.ietf-oauth-v2-threatmodel]Lodderstedt, TMcGloin, M and P Hunt, "OAuth 2.0 Threat Model and Security Considerations", Internet-Draft draft-ietf-oauth-v2-threatmodel-06, June 2012.
[I-D.draft-hardt-oauth-01]Hardt, DTom, AEaton, B and Y Goland, "OAuth Web Resource Authorization Profiles", January 2010.

Appendix A. Augmented Backus-Naur Form (ABNF) Syntax

This section provides Augmented Backus-Naur Form (ABNF) syntax descriptions for the elements defined in this specification using the notation of [RFC5234]. The ABNF below is defined in terms of Unicode code points [W3C.REC-xml-20081126]; these characters are typically encoded in UTF-8. Elements are presented in the order first defined.
Some of the definitions that follow use the URI-reference definition from [RFC3986].
Some of the definitions that follow use these common definitions:
  VSCHAR     = %x20-7E
  NQCHAR     = %x21 / %x23-5B / %x5D-7E
  NQSCHAR    = %x20-21 / %x23-5B / %x5D-7E
  UNICODECHARNOCRLF = %x09 /%x20-7E / %x80-D7FF /
                      %xE000-FFFD / %x10000-10FFFF
(The UNICODECHARNOCRLF definition is based upon the Char definition in Section 2.2 of [W3C.REC-xml-20081126], but omitting the Carriage Return and Linefeed characters.)

Appendix A.1. "client_id" Syntax

The client_id element is defined in Section 2.3.1:
  client-id     = *VSCHAR

Appendix A.2. "client_secret" Syntax

The client_secret element is defined in Section 2.3.1:
  client-secret = *VSCHAR

Appendix A.3. "response_type" Syntax

The response_type element is defined in Section 3.1.1 and Section 8.4:
  response-type = response-name *( SP response-name )
  response-name = 1*response-char
  response-char = "_" / DIGIT / ALPHA

Appendix A.4. "scope" Syntax

The scope element is defined in Section 3.3:
  scope       = scope-token *( SP scope-token )
  scope-token = 1*NQCHAR

Appendix A.5. "state" Syntax

The state element is defined in Section 4.1.1Section 4.1.2Section 4.1.2.1Section 4.2.1Section 4.2.2, and Section 4.2.2.1:
  state      = 1*VSCHAR

Appendix A.6. "redirect_uri" Syntax

The redirect_uri element is defined in Section 4.1.1Section 4.1.3, and Section 4.2.1:
  redirect-uri      = URI-reference

Appendix A.7. "error" Syntax

The error element is defined in Section 4.1.2.1Section 4.2.2.1Section 5.2Section 7.2, and Section 8.5:
  error             = 1*NQSCHAR

Appendix A.8. "error_description" Syntax

The error_description element is defined in Section 4.1.2.1Section 4.2.2.1Section 5.2, and Section 7.2:
  error-description = 1*NQSCHAR

Appendix A.9. "error_uri" Syntax

The error_uri element is defined in Section 4.1.2.1Section 4.2.2.1Section 5.2, and Section 7.2:
  error-uri         = URI-reference

Appendix A.10. "grant_type" Syntax

The grant_type element is defined in Section 4.1.3Section 4.3.2Section 4.4.2Section 6, and Section 4.5:
  grant-type = grant-name / URI-reference
  grant-name = 1*name-char
  name-char  = "-" / "." / "_" / DIGIT / ALPHA

Appendix A.11. "code" Syntax

The code element is defined in Section 4.1.3:
  code       = 1*VSCHAR

Appendix A.12. "access_token" Syntax

The access_token element is defined in Section 4.2.2 and Section 5.1:
  access-token = 1*VSCHAR

Appendix A.13. "token_type" Syntax

The token_type element is defined in Section 4.2.2Section 5.1, and Section 8.1:
  token-type = type-name / URI-reference
  type-name  = 1*name-char
  name-char  = "-" / "." / "_" / DIGIT / ALPHA

Appendix A.14. "expires_in" Syntax

The expires_in element is defined in Section 4.2.2 and Section 5.1:
  expires-in = 1*DIGIT

Appendix A.15. "username" Syntax

The username element is defined in Section 4.3.2:
  username = *UNICODECHARNOCRLF

Appendix A.16. "password" Syntax

The password element is defined in Section 4.3.2:
  password = *UNICODECHARNOCRLF

Appendix A.17. "refresh_token" Syntax

The refresh_token element is defined in Section 5.1 and Section 6:
  refresh-token = 1*VSCHAR

Appendix A.18. Endpoint Parameter Syntax

The syntax for new endpoint parameters is defined in Section 8.2:
  param-name = 1*name-char
  name-char  = "-" / "." / "_" / DIGIT / ALPHA

Appendix B. Use of application/x-www-form-urlencoded Media Type

At the time of publication of this specification, the application/x-www-form-urlencoded media type was defined in Section 17.13.4 of [W3C.REC-html401-19991224], but not registered in the IANA media types registry (<http://www.iana.org/assignments/media-types/index.html>). Furthermore, that definition is incomplete, as it does not consider non-US-ASCII characters.
To address this shortcoming when generating payloads using this media type, names and values MUST be encoded using the UTF-8 character encoding scheme [RFC3629] first; the resulting octet sequence then needs to be further encoded using the escaping rules defined in [W3C.REC-html401-19991224].
When parsing data from a payload using this media type, the names and values resulting from reversing the name/value encoding consequently need to be treated as octet sequences, to be decoded using the UTF-8 character encoding scheme.
For example, the value consisting of the six Unicode code points (1) U+0020 (SPACE), (2) U+0025 (PERCENT SIGN), (3) U+0026 (AMPERSAND), (4) U+002B (PLUS SIGN), (5) U+00A3 (POUND SIGN), and (6) U+20AC (EURO SIGN) would be encoded into the octet sequence below (using hexadecimal notation):
  20 25 26 2B C2 A3 E2 82 AC
and then represented in the payload as:
  +%25%26%2B%C2%A3%E2%82%AC

Appendix C. Acknowledgements

The initial OAuth 2.0 protocol specification was edited by David Recordon, based on two previous publications: the OAuth 1.0 community specification [RFC5849], and OAuth WRAP (OAuth Web Resource Authorization Profiles) [I-D.draft-hardt-oauth-01]. Eran Hammer then edited the drafts through draft -26. The Security Considerations section was drafted by Torsten Lodderstedt, Mark McGloin, Phil Hunt, Anthony Nadalin, and John Bradley. The section on use of the application/x-www-form-urlencoded media type was drafted by Julian Reschke. The ABNF section was drafted by Michael B. Jones.
The OAuth 1.0 community specification was edited by Eran Hammer and authored by Mark Atwood, Dirk Balfanz, Darren Bounds, Richard M. Conlan, Blaine Cook, Leah Culver, Breno de Medeiros, Brian Eaton, Kellan Elliott-McCrea, Larry Halff, Eran Hammer, Ben Laurie, Chris Messina, John Panzer, Sam Quigley, David Recordon, Eran Sandler, Jonathan Sergent, Todd Sieling, Brian Slesinsky, and Andy Smith.
The OAuth WRAP specification was edited by Dick Hardt and authored by Brian Eaton, Yaron Y. Goland, Dick Hardt, and Allen Tom.
This specification is the work of the OAuth Working Group, which includes dozens of active and dedicated participants. In particular, the following individuals contributed ideas, feedback, and wording that shaped and formed the final specification:
Michael Adams, Amanda Anganes, Andrew Arnott, Dirk Balfanz, Aiden Bell, John Bradley, Brian Campbell, Scott Cantor, Marcos Caceres, Blaine Cook, Roger Crew, Brian Eaton, Wesley Eddy, Leah Culver, Bill de hOra, Andre DeMarre, Brian Eaton, Wolter Eldering, Brian Ellin, Igor Faynberg, George Fletcher, Tim Freeman, Luca Frosini, Evan Gilbert, Yaron Y. Goland, Brent Goldman, Kristoffer Gronowski, Eran Hammer, Justin Hart, Dick Hardt, Craig Heath, Phil Hunt, Michael B. Jones, Terry Jones, John Kemp, Mark Kent, Raffi Krikorian, Chasen Le Hara, Rasmus Lerdorf, Torsten Lodderstedt, Hui-Lan Lu, Casey Lucas, Paul Madsen, Alastair Mair, Eve Maler, James Manger, Mark McGloin, Laurence Miao, William Mills, Chuck Mortimore, Anthony Nadalin, Julian Reschke, Justin Richer, Peter Saint-Andre, Nat Sakimura, Rob Sayre, Marius Scurtescu, Naitik Shah, Luke Shepard, Vlad Skvortsov, Justin Smith, Haibin Song, Niv Steingarten, Christian Stuebner, Jeremy Suriel, Paul Tarjan, Christopher Thomas, Henry S. Thompson, Allen Tom, Franklin Tse, Nick Walker, Shane Weeden, and Skylar Woodward.
This document was produced under the chairmanship of Blaine Cook, Peter Saint-Andre, Hannes Tschofenig, Barry Leiba, and Derek Atkins. The area directors included Lisa Dusseault, Peter Saint-Andre, and Stephen Farrell.

Appendix D. Document History

[[ to be removed by the RFC editor before publication as an RFC ]]
-31
  • Clarify that any client can send client_id but that sending it is only required when using the code flow if the client is not otherwise authenticated.
  • Removed David Recordon's name from the author list, at his request.
-30
  • Added text explaining why the server_error and temporarily_unavailable error codes are needed.
-29
  • Added "MUST" to "A public client that was not issued a client password MUST use the client_id request parameter to identify itself when sending requests to the token endpoint" and added text explaining why this must be so.
  • Added that the authorization server MUST "ensure the authorization code was issued to the authenticated confidential client or to the public client identified by theclient_id in the request".
  • Added Security Considerations section "Misuse of Access Token to Impersonate Resource Owner in Implicit Flow".
  • Added references in the "Implicit" and "Implicit Grant" sections to particularly pertinent security considerations.
  • Added appendix "Use of application/x-www-form-urlencoded Media Type" and referenced it in places that this encoding is used.
  • Deleted ";charset=UTF-8" from examples formerly using "Content-Type: application/x-www-form-urlencoded;charset=UTF-8".
  • Added the phrase "with a character encoding of UTF-8" when describing how to send requests using the HTTP request entity-body.
  • For symmetry when using HTTP Basic authentication, also apply the application/x-www-form-urlencoded encoding to the client password, just as was already done for the client identifier.
  • Added "The ABNF below is defined in terms of Unicode code points [W3C.REC-xml-20081126]; these characters are typically encoded in UTF-8".
  • Replaced UNICODENOCTRLCHAR in ABNF with UNICODECHARNOCRLF = %x09 / %x20-7E / %x80-D7FF / %xE000-FFFD / %x10000-10FFFF.
  • Corrected incorrect uses of "which".
  • Reduced multiple blank lines around artwork elements to single blank lines.
  • Removed Eran Hammer's name from the author list, at his request. Dick Hardt is now listed as the editor.
-28
  • Updated the ABNF in the manner discussed by the working group, allowing username and password to be Unicode and restricting client_id and client_secret to ASCII.
  • Specified the use of the application/x-www-form-urlencoded content-type encoding method to encode the client_id when used as the password for HTTP Basic.
-27
  • Added character set restrictions for error, error_description, and error_uri parameters consistent with the OAuth Bearer spec.
  • Added "resource access error response" as an error usage location in the OAuth Extensions Error Registry.
  • Added an ABNF for all message elements.
  • Corrected editorial issues identified during review.

Author's Address

Dick Hardt editorMicrosoftEMail: dick.hardt@gmail.comURI: http://dickhardt.org/



1 comment:

  1. Nice formatting of the framework spec, but no new insights.

    ReplyDelete